MA/PA 系列

下載項目

名稱	版本	作業系統	檔案大小	最後更新
	版本歷程

常見問題集

If I am using low-impedance (Lo-Z) connections, can I connect the speakers to the MA/PA Series with an impedance of 2Ω?
Can I use a condensor microphone with the MA/PA Series?
How many VXC/VXS series speakers can I connect to the M/PA Series using high-impedance (Hi-Z) connections?
How to place the device(s) on a table?
How to install MA/PA Series on an EIA standard rack?
If the MA Series and PA Series are connected, which settings can I control individually?
The DIP switch setting for SETUP seems to be ineffective.
Do the MA/PA Series feature any protective functions?
Would changing the ST Source on the MA2030a cause switching noise?
Can I disable the Stanbymode on the MA2120 and PA2120?
If ducker is turned on for MIC IN1 and 2 of the MA2030a and both microphones are used at the same time, which input will have priority?
What is the Leveler function on the MA Series?
To which input is the Leveler function on the MA2030a applied?
Can I disable the Feedback Suppressor function on the MA Series?
Can I disable the HPF (High Pass Filter) for MIC IN on the MA Series?
Can I apply Speaker EQ for VXS or VXC series to third-party (non-Yamaha) speakers?
How can I contorl DSP functions of the MA2120?
To which input is the Leveler function on the MA2120 applied?
Up to how many DCP1V4S units can be connected to a single amplifire?
Can I connect any controllers to the unit?
What kind of cables can I use to connect the DCP Series to MA/PA Series?
What is the maximum length for the cable that connects the DCP Series and MA/PA Series?
How is the volume control of the MA/PA Series related to the volume control of the DCP Series?

名稱	語言	檔案大小

	—	—	—

名稱	語言	檔案大小

	—	—	—

下載項目

結果

結果

結果

結果

常見問題集

Select Your Location